DoorHan SHAFT-120 Manuel d'installation et d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} DoorHan SHAFT-120. DoorHan SHAFT-120 12 pages.
Également pour DoorHan SHAFT-120 : Manuel d'installation et d'utilisation (12 pages)

Imprimer la page

ELECTRICAL CONNECTIONS

3. Motor (terminal block X4)

Connect the motor to terminals "U", "V" and "W".

380V motor: max. operating current < 9 A, wattage ≤ 4 kW.

3~Motor: 380 V

4. Limit switches (terminal block X0)

Connect limit switch wires "OP" (opening switch), "CL" (closing switch) and "GND" (common wire).

Close Open Common

5. 3-position control post or key-switch (N.O. contact) (terminal block X1 and X2)

Connect 3-position control post to the terminals "OPEN", "STOP", "CLOSE" and "GND".

Connect the key-switch to terminals "D" and "GND".

Key-switch

3-position control post

Трехпозиционный

WARNING! If 3-position control post is not used, install a jumper between "STOP" and "GND".