DoorHan SHAFT-120 설치 및 운영 매뉴얼 - 페이지 8

{카테고리_이름} DoorHan SHAFT-120에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan SHAFT-120 12 페이지.
DoorHan SHAFT-120에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (12 페이지)

페이지 인쇄

ELECTRICAL CONNECTIONS

3. Motor (terminal block X4)

Connect the motor to terminals "U", "V" and "W".

380V motor: max. operating current < 9 A, wattage ≤ 4 kW.

3~Motor: 380 V

4. Limit switches (terminal block X0)

Connect limit switch wires "OP" (opening switch), "CL" (closing switch) and "GND" (common wire).

Close Open Common

5. 3-position control post or key-switch (N.O. contact) (terminal block X1 and X2)

Connect 3-position control post to the terminals "OPEN", "STOP", "CLOSE" and "GND".

Connect the key-switch to terminals "D" and "GND".

Key-switch

3-position control post

Трехпозиционный

WARNING! If 3-position control post is not used, install a jumper between "STOP" and "GND".