Dot Origin VTAP100-PACS Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dot Origin VTAP100-PACS. Dot Origin VTAP100-PACS 14 pages. Mobile nfc pass reader

Imprimer la page

3 Mechanical installation

The VTAP100 unit for OEM integration comprises a PCB with an integral antenna.

WARNING: Observe all

There is more detailed information in the next section about how to fit the VTAP100 unit inside the

Optional wallbox

3.1 Power

Connect the PCB to a PC using only a MicroUSB to USB cable, or the optional captive USB cable, if

any. (Never connect both at the same time).

The VTAP100-PACS model can alternatively be powered by connecting it to an access controller,

using the Wiegand connector supplied (see .

The VTAP100 is rated at 5V DC @ 50 to 150mA for power over USB. When powered over Wiegand it

is rated at 8V DC @ 30 to 100mA

3.2 Environment

The VTAP100 must be stored and operated under the following conditions:

Ambient temperature 0 to +50degC

Humidity 0 to 95% RH non-condensing

Pressure 86-106kPa

VTAP100-PACS V3A INSTALLATION GUIDE

Figure 3-1 VTAP100 components

Safety instructions

case, if used.

when installing the VTAP100 PCB.

PAGE 3