Dot Origin VTAP100-PACS Посібник з монтажу - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари для мобільних телефонів Dot Origin VTAP100-PACS. Dot Origin VTAP100-PACS 14 сторінок. Mobile nfc pass reader

Друкувати сторінку
3   Mechanical installation
The VTAP100 unit for OEM integration comprises a PCB with an integral antenna.
WARNING: Observe all
There is more detailed information in the next section about how to fit the VTAP100 unit inside the
Optional wallbox

3.1 Power

Connect the PCB to a PC using only a MicroUSB to USB cable, or the optional captive USB cable, if
any. (Never connect both at the same time).
The VTAP100-PACS model can alternatively be powered by connecting it to an access controller,
using the Wiegand connector supplied (see .
The VTAP100 is rated at 5V DC @ 50 to 150mA for power over USB. When powered over Wiegand it
is rated at 8V DC @ 30 to 100mA

3.2 Environment

The VTAP100 must be stored and operated under the following conditions:
Ambient temperature 0 to +50degC
l
Humidity 0 to 95% RH non-condensing
l
Pressure 86-106kPa
l
VTAP100-PACS V3A INSTALLATION GUIDE
Figure 3-1 VTAP100 components
Safety instructions
case, if used.
when installing the VTAP100 PCB.
PAGE 3