Baumer HUBNER BERLIN DeviceNet HMG 10 Instructions de montage et d'utilisation - Page 16

Parcourez en ligne ou téléchargez le pdf Instructions de montage et d'utilisation pour {nom_de_la_catégorie} Baumer HUBNER BERLIN DeviceNet HMG 10. Baumer HUBNER BERLIN DeviceNet HMG 10 36 pages. Absolute encoder with magnetic sensing

Imprimer la page
ELECTRICAL CONNECTION / DEVICENET
5.

ELECTRICAL CONNECTION

5.1
DeviceNet
Please ind a detailed instruction for the DeviceNet interface and the device descrip-
i
tion ile in the manual on the CD provided with the device.
5.1.1
Features
Bus protocol
Device proile
Operating modes
Preset value
Parameter functions
Diagnostic
Default settings
13/33
DeviceNet
Device Proil for Encoders V 1.0
I/O-Polling
Cyclic
Change of State
The „Preset" parameter can be used to set the encoder
to a predeined value that corresponds to a speciic axis
position of the system�
The offset of encoder zero point and mechanical zero
point is stored in the encoder�
Rotating direction:
The relationship between the rotating direction and
rising or falling output code values can be set in the
operating parameter�
Scaling:
The parameter values set the number of steps per turn
and the overall resolution�
The encoder supports the following error warnings:
- Position and parameter error
User address 00
MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN