Baumer HUBNER BERLIN DeviceNet HMG 10 Mounting And Operating Instructions - Page 16

Browse online or download pdf Mounting And Operating Instructions for Media Converter Baumer HUBNER BERLIN DeviceNet HMG 10. Baumer HUBNER BERLIN DeviceNet HMG 10 36 pages. Absolute encoder with magnetic sensing

Print Page
ELECTRICAL CONNECTION / DEVICENET
5.

ELECTRICAL CONNECTION

5.1
DeviceNet
Please ind a detailed instruction for the DeviceNet interface and the device descrip-
i
tion ile in the manual on the CD provided with the device.
5.1.1
Features
Bus protocol
Device proile
Operating modes
Preset value
Parameter functions
Diagnostic
Default settings
13/33
DeviceNet
Device Proil for Encoders V 1.0
I/O-Polling
Cyclic
Change of State
The „Preset" parameter can be used to set the encoder
to a predeined value that corresponds to a speciic axis
position of the system�
The offset of encoder zero point and mechanical zero
point is stored in the encoder�
Rotating direction:
The relationship between the rotating direction and
rising or falling output code values can be set in the
operating parameter�
Scaling:
The parameter values set the number of steps per turn
and the overall resolution�
The encoder supports the following error warnings:
- Position and parameter error
User address 00
MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN