Follett 400 Series Manuel d'installation et d'entretien - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'entretien pour {nom_de_la_catégorie} Follett 400 Series. Follett 400 Series 20 pages. Icemaker and top kit for remcor/cornelius countertop ice and beverage dispensers

Imprimer la page

19. Remove lid from dispenser top (Fig. 13.). Remove the

knockout from the Harmony top (Fig. 13.2) corresponding to

selected chase location. Line the edges of the opening with

the supplied gasket material (Fig. 13.2).

20. Follow the "Satellite-fill icemaker installation procedure"

found in the Symphony MCD400 Icemaker Manual 208600

to install your Follett icemaker.

21. Route the bin signal cord from the 4" x 4" (102mm x 102mm)

junction box through the top knockout (Fig. 13.1) and

countertop hole. Attach the bin signal connector to the two

lead plug on the icemaker.

22. Route the ice transport tube(s) from the icemaker(s) through

counter cutout and knock out into dispenser top by following

the same routing as the bin signal cord (Fig. 13.2).

Fig. 13