AMS AS5 Series Manuel d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AMS AS5 Series. AMS AS5 Series 11 pages. Uart programmer
Également pour AMS AS5 Series : Manuel de l'utilisateur (12 pages)
Imprimer la page
AS5xxx-EK-USB-PB – UART Programmer Operation Manual
1.1
Communication
The Mini-USB socket is used for communicating with the computer. Therefore, a Mini-USB to USB
cable is necessary. The board is using a FT232R – USB-to-UART IC by FTDI. Therefore the
installation of the VCP (Virtual COM Port) is necessary to detect the USB device as a COM Port.
The driver can be downloaded from the official FTDI website using following link:
http://www.ftdichip.com/Drivers/VCP.htm
1.2
Power supply
By default the 5V supply voltage is provided by the USB interface. Depending if the jumpers J3, J4
and J5 are open or closed the supply source can be switched to external power supply.
Figure 3: Jumper configuration
J3
SET
NC
ams Application Note, Confidential
[v1-20] 2014-Dec-03
J4
SET
NC
J5
Supply source
NC
External
SET
Document Feedback
USB
Page 4