Draper SLX14 Manuel d'installation et d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Draper SLX14. Draper SLX14 7 pages. 230v ac scissor lift slx video projector lift
Également pour Draper SLX14 : Brochure & Specs (16 pages), Manuel d'installation et d'utilisation (7 pages), Instructions d'installation et d'utilisation (8 pages), Instructions d'installation et d'utilisation (4 pages), Manuel d'installation et d'utilisation (7 pages)

Imprimer la page

Draper SLX14 Manuel d'installation et d'utilisation

Scissor Lift SLX by Draper

Installing Optional Environmental Air Space Housing

The Environmental Air Space Housing is shipped in pieces, and must be

assembled by the installer. The height of the Environmental Air Space Hous-

ing can be adjusted by moving the screws to different mounting holes in side

panels. Aluminum tape is provided to cover unused holes. It is recommended

that an access panel be installed in the ceiling to allow future access. The

optional environmental air space housing must be installed per instructions to

isolate the lift from the "other space used for environmental air."

electrical knockouts

on bottom sections

Do not use

Item

Qty

Part Number

①

C028.544.02SA

②

C028.545.07SA

③

C044.178SA

④

C044.180SA

⑤

C044.179SA

⑥

C044.177SA

⑦

C095.123SA

⑧

C020.325

⑨

C018.051

⑩

C013.070

⑪

C020.112

Caution: Be careful when handling Environmental Air Space

Housing Panels. The panels could have sharp edges.

www.draperinc.com

① Attach Environmental Air Space Housing top frame to top of Scissor Lift

SLX with bolts provided.

② Install top panel to Environmental Air Space Housing frame.

③ Attach assembly to overhead structure. Allow clearance between Environ-

mental Air Space Housing top and structure for ease of future access.

④ Install side and end panels, and trim frame.

Description

Frame, SLX Plenum

Frame, SLX Trim Ring

Panel, SLX Plenum Side

Panel, SLX Plenum End

Panel, SLX Middle End

Panel, SLX Plenum Middle Side

Cover, SLX Plenum

Screw, 8-32 x

" Type 1 HWH

Nut #8-32 Zinc Hex KEPS

Washer, .188 I.D. x .5 O.D. x .07" TK Nylon Flat

Screw, 8-32 x

" Type F HWH

(765) 987-7999

page

of 7