Draper SLX14 Installation And Operation Manual - Page 7
Browse online or download pdf Installation And Operation Manual for Projection Screen Draper SLX14. Draper SLX14 7 pages. 230v ac scissor lift slx video projector lift
Also for Draper SLX14: Brochure & Specs (16 pages), Installation & Operating Instructions Manual (7 pages), Installation & Operation Instructions (8 pages), Installation & Operating Instructions (4 pages), Installation & Operating Instructions Manual (7 pages)
Print Page
Scissor Lift SLX by Draper
Installing Optional Environmental Air Space Housing
The Environmental Air Space Housing is shipped in pieces, and must be
assembled by the installer. The height of the Environmental Air Space Hous-
ing can be adjusted by moving the screws to different mounting holes in side
panels. Aluminum tape is provided to cover unused holes. It is recommended
that an access panel be installed in the ceiling to allow future access. The
optional environmental air space housing must be installed per instructions to
isolate the lift from the "other space used for environmental air."
3
8
5
4
3
6
4
electrical knockouts
on bottom sections
11
11
11
11
Do not use
2
Item
Qty
Part Number
①
1
C028.544.02SA
②
1
C028.545.07SA
③
4
C044.178SA
④
4
C044.180SA
⑤
2
C044.179SA
⑥
2
C044.177SA
⑦
1
C095.123SA
⑧
28
C020.325
⑨
40
C018.051
⑩
12
C013.070
⑪
24
C020.112
Caution: Be careful when handling Environmental Air Space
Housing Panels. The panels could have sharp edges.
www.draperinc.com
① Attach Environmental Air Space Housing top frame to top of Scissor Lift
SLX with bolts provided.
② Install top panel to Environmental Air Space Housing frame.
③ Attach assembly to overhead structure. Allow clearance between Environ-
mental Air Space Housing top and structure for ease of future access.
④ Install side and end panels, and trim frame.
7
11
11
Description
Frame, SLX Plenum
Frame, SLX Trim Ring
Panel, SLX Plenum Side
Panel, SLX Plenum End
Panel, SLX Middle End
Panel, SLX Plenum Middle Side
Cover, SLX Plenum
Screw, 8-32 x
3
/
" Type 1 HWH
8
Nut #8-32 Zinc Hex KEPS
Washer, .188 I.D. x .5 O.D. x .07" TK Nylon Flat
Screw, 8-32 x
3
/
" Type F HWH
8
(765) 987-7999
11
1
3
11
9
9
10
page
7
of 7
5
3