Draper SLX14 설치 및 운영 매뉴얼 - 페이지 7
{카테고리_이름} Draper SLX14에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Draper SLX14 7 페이지. 230v ac scissor lift slx video projector lift
Draper SLX14에 대해서도 마찬가지입니다: 브로셔 및 사양 (16 페이지), 설치 및 운영 지침 매뉴얼 (7 페이지), 설치 및 작동 지침 (8 페이지), 설치 및 운영 지침 (4 페이지), 설치 및 운영 지침 매뉴얼 (7 페이지)
페이지 인쇄
Scissor Lift SLX by Draper
Installing Optional Environmental Air Space Housing
The Environmental Air Space Housing is shipped in pieces, and must be
assembled by the installer. The height of the Environmental Air Space Hous-
ing can be adjusted by moving the screws to different mounting holes in side
panels. Aluminum tape is provided to cover unused holes. It is recommended
that an access panel be installed in the ceiling to allow future access. The
optional environmental air space housing must be installed per instructions to
isolate the lift from the "other space used for environmental air."
3
8
5
4
3
6
4
electrical knockouts
on bottom sections
11
11
11
11
Do not use
2
Item
Qty
Part Number
①
1
C028.544.02SA
②
1
C028.545.07SA
③
4
C044.178SA
④
4
C044.180SA
⑤
2
C044.179SA
⑥
2
C044.177SA
⑦
1
C095.123SA
⑧
28
C020.325
⑨
40
C018.051
⑩
12
C013.070
⑪
24
C020.112
Caution: Be careful when handling Environmental Air Space
Housing Panels. The panels could have sharp edges.
www.draperinc.com
① Attach Environmental Air Space Housing top frame to top of Scissor Lift
SLX with bolts provided.
② Install top panel to Environmental Air Space Housing frame.
③ Attach assembly to overhead structure. Allow clearance between Environ-
mental Air Space Housing top and structure for ease of future access.
④ Install side and end panels, and trim frame.
7
11
11
Description
Frame, SLX Plenum
Frame, SLX Trim Ring
Panel, SLX Plenum Side
Panel, SLX Plenum End
Panel, SLX Middle End
Panel, SLX Plenum Middle Side
Cover, SLX Plenum
Screw, 8-32 x
3
/
" Type 1 HWH
8
Nut #8-32 Zinc Hex KEPS
Washer, .188 I.D. x .5 O.D. x .07" TK Nylon Flat
Screw, 8-32 x
3
/
" Type F HWH
8
(765) 987-7999
11
1
3
11
9
9
10
page
7
of 7
5
3