anko YS-1201GD BK Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko YS-1201GD BK. anko YS-1201GD BK 12 pages. 30cm bench fan
Imprimer la page
4 Instructions for Use
Remove the cable tie and unravel the cordset before operation.
4.1 Head Tilt
The fan and motor assembly Can be tilted up and down to your
desired angle.
To adjust the tilt angle, undo the adjustment knob, tilt the head
to the desired angle and then re-tighten the knob.
4.2 Fan On / Off / Speed
Rotate the knob to position I for a low speed, II for a medium
speed and III for a high speed.
Rotate the knob to position 0 to switch the Fan off.
4.3 Oscillation
Press the clutch knob down to activate the oscillating function. The
fan head will swing from side to side whilst blowing air.
To stop oscillation, allow the Fan head to move into the desired position
and then pull the clutch knob up.
5 Care and Cleaning
•
Ensure that the fan is switched off from the supply mains before removing the guard.
•
Turn off and unplug the unit prior to cleaning.
•
Clean the motor housing and body assembly with a clean, damp cloth and wipe
dry.
•
Never spray with liquids or submerge the Fan in water or any other liquid.
•
Do not use flammable liquids, chemicals, abrasive creams, steel wool or
scouring pads for cleaning.
6 Storage
Switch off and unplug the fan.
Coil the cable loosely. Do not kink or pull the cable
tight. Store your fan in a cool, dry location
Page 10 of 12