anko YS-1201GD BK Podręcznik użytkownika - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wentylator anko YS-1201GD BK. anko YS-1201GD BK 12 stron. 30cm bench fan

4 Instructions for Use

Remove the cable tie and unravel the cordset before operation.

4.1 Head Tilt

The fan and motor assembly Can be tilted up and down to your

desired angle.

To adjust the tilt angle, undo the adjustment knob, tilt the head

to the desired angle and then re-tighten the knob.

4.2 Fan On / Off / Speed

Rotate the knob to position I for a low speed, II for a medium

speed and III for a high speed.

Rotate the knob to position 0 to switch the Fan off.

4.3 Oscillation

Press the clutch knob down to activate the oscillating function. The

fan head will swing from side to side whilst blowing air.

To stop oscillation, allow the Fan head to move into the desired position

and then pull the clutch knob up.

5 Care and Cleaning

•

Ensure that the fan is switched off from the supply mains before removing the guard.

•

Turn off and unplug the unit prior to cleaning.

•

Clean the motor housing and body assembly with a clean, damp cloth and wipe

dry.

•

Never spray with liquids or submerge the Fan in water or any other liquid.

•

Do not use flammable liquids, chemicals, abrasive creams, steel wool or

scouring pads for cleaning.

6 Storage

Switch off and unplug the fan.

Coil the cable loosely. Do not kink or pull the cable

tight. Store your fan in a cool, dry location

Page 10 of 12