anko YS-1201GD BK Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wentylator anko YS-1201GD BK. anko YS-1201GD BK 12 stron. 30cm bench fan

3 Assembly

Your Fan has been boxed partially unassembled to minimise packaging waste.

Each part is designed to fit together and be disassembled easily for cleaning or storage.

3.1 Safety Grille and Fan Blade

To assemble the safety grille and blade assembly, take the motor assembly and remove

the 4 screws as identified.

Fit the rear safety grille into position (with the handle on the back of the grille at the top)

and refit the 4 screws and tighten.

Remove the protective plastic sleeve from the motor spindle shaft and discard.

Next, rotate the motor spindle until the "flat" surface is facing up.

Slide the fan blade onto the spindle ensuring the screw is lined up with the "flat" surface

on the spindle as shown.

Push on until the end of the spindle is flush with the end of the fan blade hole, then tighten

the screw.

"Flat" surface on

Motor Spindle

Fan Blade Screw

Tighten Fan

Blade Screw

Page 8 of 12

Fan Blade hole flush

with Motor Spindle