anko YS-1201GD BK Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} anko YS-1201GD BK. anko YS-1201GD BK 12 pages. 30cm bench fan
Imprimer la page
3 Assembly
Your Fan has been boxed partially unassembled to minimise packaging waste.
Each part is designed to fit together and be disassembled easily for cleaning or storage.
3.1 Safety Grille and Fan Blade
To assemble the safety grille and blade assembly, take the motor assembly and remove
the 4 screws as identified.
Fit the rear safety grille into position (with the handle on the back of the grille at the top)
and refit the 4 screws and tighten.
Remove the protective plastic sleeve from the motor spindle shaft and discard.
Next, rotate the motor spindle until the "flat" surface is facing up.
Slide the fan blade onto the spindle ensuring the screw is lined up with the "flat" surface
on the spindle as shown.
Push on until the end of the spindle is flush with the end of the fan blade hole, then tighten
the screw.
"Flat" surface on
Motor Spindle
Fan Blade Screw
Tighten Fan
Blade Screw
Page 8 of 12
Fan Blade hole flush
with Motor Spindle