Dry-Lam 27" Manuel d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Dry-Lam 27". Dry-Lam 27" 15 pages. School & office laminators
Imprimer la page
• Read all the safety and operating instructions before connecting or using this unit.
• Retain this notice and the owner's manual for future reference.
• Adhere to all warnings and operating instructions.
• Do not use this unit near water (e.g. near a bathtub, etc.)
• The wearing of ties or jewelry while operating a laminator may be hazardous to the operator.
• Warning do not touch Hot Surfaces such as heat shoes and heat rollers.
• Do not install optional slitter kit if Heatshoe is hot.
• This unit should be installed so that its location or position does not interfere with its proper
ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may
block the ventilation openings; or placed in a built-in installation, such as bookcase or cabinet or
against the wall, that may impede the flow of air through its ventilation openings.
• This unit should be situated away from heat sources such as radiators, heat registers, stoves, etc.
• This unit should only be connected to a power supply outlet of the voltage, amperage and
Frequency marked on its serial tag.
• For 120 volt machines the socket outlet shall be installed near the equipment and be easily
accessible.
•For 240 volt machines a readily accessible disconnect device shall be incorporated in the building
installation wiring.
• The power supply cord should be routed so that it is not likely to be walked upon or pinched,
especially near the plug, convenience receptacles, or where the cord exits from the unit.
• Unplug the machine during any machine repairs.
• Clean unit only as recommended in this instruction manual.
• Make sure to remove the Feed Table before reversing the machine!
• Care should be taken so that objects do not fall, and liquids are not spilled, into the enclosure
through any openings.
• Caution: The Cutter blade is extremely sharp. Please handle carefully and dispose of properly.
EQUIPMENT WARRANTY
We warrant to the original purchaser the equipment manufactured by us to be free from defects in material and
workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or exchange
of any part or parts which may thus prove defective under normal use and service within one year from the date of shipment
and which our examination shall disclose to our satisfaction to be thus defective. When necessary, purchaser shall properly
pack and return the unit to the nearest Dry-Lam Service Center, freight and insurance prepaid. THIS WARRANTY IS
EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING THE WARRAN-
TIES OF THE MERCHANTABILITY AND FITNESS FOR USE AND OF ALL OTHER OBLIGATIONS OR
LIABILITIES ON OUR PART, AND WE NEITHER ASSUME NOR AUTHORIZE ANY OTHER PERSON TO
ASSUME FOR US, ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS MACHINE OR ANY
PART THEREOF WHICH HAS BEEN SUBJECT TO ACCIDENT, NEGLIGENCE, ALTERATION, ABUSE OR
MISUSE. WE MAKE NO WARRANTY WHATSOEVER IN RESPECT TO ACCESSORIES OR PARTS NOT
SUPPLIED BY US. THE TERM "ORIGINAL PURCHASER" AS USED IN THIS WARRANTY, SHALL BE DEEMED
TO MEAN THE PERSON OR COMPANY WHO FIRST PUTS THE DRY-LAM EQUIPMENT INTO SERVICE. THIS
WARRANTY SHALL APPLY ONLY WITHIN THE BOUNDARIES OF THE CONTINENTAL UNITED STATES.
SERVICE CENTER