Dry-Lam 27" Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Laminator Dry-Lam 27". Dry-Lam 27" 15 stron. School & office laminators

• Read all the safety and operating instructions before connecting or using this unit.

• Retain this notice and the owner's manual for future reference.

• Adhere to all warnings and operating instructions.

• Do not use this unit near water (e.g. near a bathtub, etc.)

• The wearing of ties or jewelry while operating a laminator may be hazardous to the operator.

• Warning do not touch Hot Surfaces such as heat shoes and heat rollers.

• Do not install optional slitter kit if Heatshoe is hot.

• This unit should be installed so that its location or position does not interfere with its proper

ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may

block the ventilation openings; or placed in a built-in installation, such as bookcase or cabinet or

against the wall, that may impede the flow of air through its ventilation openings.

• This unit should be situated away from heat sources such as radiators, heat registers, stoves, etc.

• This unit should only be connected to a power supply outlet of the voltage, amperage and

Frequency marked on its serial tag.

• For 120 volt machines the socket outlet shall be installed near the equipment and be easily

accessible.

•For 240 volt machines a readily accessible disconnect device shall be incorporated in the building

installation wiring.

• The power supply cord should be routed so that it is not likely to be walked upon or pinched,

especially near the plug, convenience receptacles, or where the cord exits from the unit.

• Unplug the machine during any machine repairs.

• Clean unit only as recommended in this instruction manual.

• Make sure to remove the Feed Table before reversing the machine!

• Care should be taken so that objects do not fall, and liquids are not spilled, into the enclosure

through any openings.

• Caution: The Cutter blade is extremely sharp. Please handle carefully and dispose of properly.

EQUIPMENT WARRANTY

We warrant to the original purchaser the equipment manufactured by us to be free from defects in material and

workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or exchange

of any part or parts which may thus prove defective under normal use and service within one year from the date of shipment

and which our examination shall disclose to our satisfaction to be thus defective. When necessary, purchaser shall properly

pack and return the unit to the nearest Dry-Lam Service Center, freight and insurance prepaid. THIS WARRANTY IS

EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING THE WARRAN-

TIES OF THE MERCHANTABILITY AND FITNESS FOR USE AND OF ALL OTHER OBLIGATIONS OR

LIABILITIES ON OUR PART, AND WE NEITHER ASSUME NOR AUTHORIZE ANY OTHER PERSON TO

ASSUME FOR US, ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS MACHINE OR ANY

PART THEREOF WHICH HAS BEEN SUBJECT TO ACCIDENT, NEGLIGENCE, ALTERATION, ABUSE OR

MISUSE. WE MAKE NO WARRANTY WHATSOEVER IN RESPECT TO ACCESSORIES OR PARTS NOT

SUPPLIED BY US. THE TERM "ORIGINAL PURCHASER" AS USED IN THIS WARRANTY, SHALL BE DEEMED

TO MEAN THE PERSON OR COMPANY WHO FIRST PUTS THE DRY-LAM EQUIPMENT INTO SERVICE. THIS

WARRANTY SHALL APPLY ONLY WITHIN THE BOUNDARIES OF THE CONTINENTAL UNITED STATES.

SERVICE CENTER