AIRTUG 10-SW Instructions d'assemblage et d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions d'assemblage et d'utilisation pour {nom_de_la_catégorie} AIRTUG 10-SW. AIRTUG 10-SW 4 pages.

Airtug® /

Winch Operation

1. Ensure the strap is always over the top of the winch wheel.

If you notice it on the bottom - pull the strap all the way out

and wind it back in so the strap is positioned over the top of

the winch wheel.

2. When loading an aircraft, press the lock lever towards the

handle and frame to the down position and pull the strap out

towards the front of the tug. You should hear the winch

clicking throughout this action.

3. Connect the strut strap around the nose gear or the "J"

hook (if purchased as an option) - connect to the hook at

the end of the strap. Position the winch lever to the straight

up position (locked) and load the aircraft onto the tug by

cranking the winch handle clockwise. You are now ready to

move the aircraft.

10-SW Assembly & Operating Instructions / 7-17-17

AIRTUG®, LLC,

1350 CHESTER INDUSTRIAL PKWY,

AVON, OH 44011

1-216-941-9781

WWW.AIRTUG.COM

/ 216-941-9781 / www.airtug.com