AIRTUG NFE-6 Instructions d'assemblage et d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions d'assemblage et d'utilisation pour {nom_de_la_catégorie} AIRTUG NFE-6. AIRTUG NFE-6 8 pages.

b. Connect the yellow Fuse Holder with its

mate coming from the battery box

c. Connect the Plug to the controller - note

the position of the notch in the plug

Step 3: Prior to the ﬁrst use, plug the charger cable into a 110V outlet or extension cord and charge

the batteries fully as indicated by the green light at the top of the charger. The orange light indicates

batteries are charging. Keep the battery charger plugged in between use. See the battery charger

manual for more information.

Winch Operation

1. Ensure the strap is always over the top of the winch wheel. If you notice it on the bottom - pull the

strap all the way out and wind it back in so the strap is positioned over the top of the winch wheel.

2. When loading an aircraft, press the lock lever towards the handle and frame to the down position

and pull the strap out towards the front of the tug. You should hear the winch clicking throughout

this action.

3. Connect the strut strap around the nose gear or the "J" hook (if purchased as an option) - connect

to the hook at the end of the strap. Position the winch lever to the straight up position (locked) and

load the aircraft onto the tug cranking the winch handle clockwise. You are now ready to move the

aircraft.

www.airtug.com

Plug goes to J2 position