ページを印刷するb. Connect the yellow Fuse Holder with its
mate coming from the battery box
c. Connect the Plug to the controller - note
the position of the notch in the plug
Step 3: Prior to the first use, plug the charger cable into a 110V outlet or extension cord and charge
the batteries fully as indicated by the green light at the top of the charger. The orange light indicates
batteries are charging. Keep the battery charger plugged in between use. See the battery charger
manual for more information.
Winch Operation
1. Ensure the strap is always over the top of the winch wheel. If you notice it on the bottom - pull the
strap all the way out and wind it back in so the strap is positioned over the top of the winch wheel.
2. When loading an aircraft, press the lock lever towards the handle and frame to the down position
and pull the strap out towards the front of the tug. You should hear the winch clicking throughout
this action.
3. Connect the strut strap around the nose gear or the "J" hook (if purchased as an option) - connect
to the hook at the end of the strap. Position the winch lever to the straight up position (locked) and
load the aircraft onto the tug cranking the winch handle clockwise. You are now ready to move the
aircraft.
www.airtug.com
4
Plug goes to J2 position