Anyload NPS Series Manuel de l'opérateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Anyload NPS Series. Anyload NPS Series 12 pages. Pallet jack scale
Imprimer la page
2. If zero correction or zero calibration is needed, enter [ 0000.0] as the
calibration weight then proceed the calibration. It will return to
weighing mode.
6. Power Supply
POWER SELECTION
1. 7.4V/2500mAh Lithium Rechargeable battery
2. 110 - 220V AC/DC adaptor 10VDC, 1000mA
Instructions for using the battery:
1. Fully charged the battery during its first time use
Use the specified charger/ power adaptor and plug it to a source
ranging 100-240VAC, 50/60hz. The battery is being charged when the
display is showing " CHArGE" " -------" and " Pbtxx"
2. When the low battery symbol is on, it means the power of scale is low
and needs to change the battery or to recharge using the specified
adaptor.
9 |
ANYLOAD NPS Series Pallet Jack Scale Operator's Guide (V1906) – T15E v2 series indicator