Anyload NPS Series 운영자 매뉴얼 - 페이지 10

{카테고리_이름} Anyload NPS Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anyload NPS Series 12 페이지. Pallet jack scale

2. If zero correction or zero calibration is needed, enter [ 0000.0] as the

calibration weight then proceed the calibration. It will return to

weighing mode.

6. Power Supply

POWER SELECTION

1. 7.4V/2500mAh Lithium Rechargeable battery

2. 110 - 220V AC/DC adaptor 10VDC, 1000mA

Instructions for using the battery:

1. Fully charged the battery during its first time use

Use the specified charger/ power adaptor and plug it to a source

ranging 100-240VAC, 50/60hz. The battery is being charged when the

display is showing " CHArGE" " -------" and " Pbtxx"

2. When the low battery symbol is on, it means the power of scale is low

and needs to change the battery or to recharge using the specified

adaptor.

9 |

ANYLOAD NPS Series Pallet Jack Scale Operator's Guide (V1906) – T15E v2 series indicator