ABTronic PTZ-715WP Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ABTronic PTZ-715WP. ABTronic PTZ-715WP 7 pages. Outdoor ptz camera

Imprimer la page

1. Camera connections

Camera has three cables outside:

1) RS-485 communication:

violet (red): RS485 +

●

gray (black): RS485 -

●

2) Video signal

BNC socket: video composite signal

●

3) Power supply

2.1/5.5mm socket: DC12V / 800mA

●

2. RS-485 port configuration

The PTZ camera functions are controlled by RS-485 port. The port parameters can be set

using DIP-Switches or via RS-485 interface.

To set the switches positions, you have to remove the camera dome cover (unscrew 4

screws), and next remove the plastic protection (4 screws).

2.1 DIP-switches configuration

Device address setting:

The device address can be set in range: 1 – 63 (for PELCO-P: 0 – 63).

To enter the proper address you should use the DIP1 – 6 switches and set the right combination

according to below picture. The device address is the sum of the numbers from corresponding

switches, which were set to ON position.

The ON/OFF switches and corresponding numbers: