Danfoss DEVIreg Multi Manuel d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Danfoss DEVIreg Multi. Danfoss DEVIreg Multi 16 pages. Self-limiting cables on drum
Également pour Danfoss DEVIreg Multi : Manuel d'installation (12 pages)
Imprimer la page
3
Settings
How to change the minimum and maximum floor
temperatures
1. Remove the adjustment button.
4. Move the pins to the desired
positions.
5. Put the adjustment button
back in place.
Note: Please be aware of the following:
• The floor temperature is measured where the floor
sensor is placed.
• The temperature of the bottom of a wooden floor can
be up to 10 degrees higher than the top.
• Floor manufactures often specify the max temperature
on the top surface of the floor (usually 27-28˚C).
• Always use a floor sensor to control floor heating.
Without a floor sensor, the temperature control may
be less accurate and you risk overheating the floor.
8
DEVIreg™ 530M
3
2
40
50
30
20
Installation Guide
4
5
6