Danfoss DEVIreg Multi Посібник з монтажу - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з монтажу для Терморегулятор Danfoss DEVIreg Multi. Danfoss DEVIreg Multi 16 сторінок. Self-limiting cables on drum
Також для Danfoss DEVIreg Multi: Посібник з монтажу (12 сторінок)
Друкувати сторінку
3
Settings
How to change the minimum and maximum floor
temperatures
1. Remove the adjustment button.
4. Move the pins to the desired
positions.
5. Put the adjustment button
back in place.
Note: Please be aware of the following:
• The floor temperature is measured where the floor
sensor is placed.
• The temperature of the bottom of a wooden floor can
be up to 10 degrees higher than the top.
• Floor manufactures often specify the max temperature
on the top surface of the floor (usually 27-28˚C).
• Always use a floor sensor to control floor heating.
Without a floor sensor, the temperature control may
be less accurate and you risk overheating the floor.
8
DEVIreg™ 530M
3
2
40
50
30
20
Installation Guide
4
5
6