Danfoss DEVIreg Multi Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Termostat Danfoss DEVIreg Multi. Danfoss DEVIreg Multi 16 halaman. Self-limiting cables on drum
Juga untuk Danfoss DEVIreg Multi: Panduan Instalasi (12 halaman)

Halaman Cetak

Settings

How to change the minimum and maximum floor

temperatures

1. Remove the adjustment button.

4. Move the pins to the desired

positions.

5. Put the adjustment button

back in place.

Note: Please be aware of the following:

• The floor temperature is measured where the floor

sensor is placed.

• The temperature of the bottom of a wooden floor can

be up to 10 degrees higher than the top.

• Floor manufactures often specify the max temperature

on the top surface of the floor (usually 27-28˚C).

• Always use a floor sensor to control floor heating.

Without a floor sensor, the temperature control may

be less accurate and you risk overheating the floor.

DEVIreg™ 530M

Installation Guide