AudioCodes MP-100 Manuel de démarrage rapide - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AudioCodes MP-100. AudioCodes MP-100 17 pages.

AudioCodes™ MP-100/104 Gateway Quick Start Installation Guide

March 2004

13.

Once all files are loaded, the green lamps on the LAN and Ready LEDs light. Follow the

instructions on the following pages to launch the MP-104 Web administrator and configure the

application.

Page 8 of 17

Reset the MP-104 by doing one of the following:

— Click Apply & Reset in the Client Configuration dialog.

— Click the RESET button ( ) on the main screen. When prompted, enter the IP

address of the MP-104 and click OK.

— Unplug the AC power cord from the back of the MP-104 and plug it in again.

— Press the RESTART button, shown on

bent paper clip).

NOTE:

Make sure the Pause icon (

If you have more than one AudioCodes MP-104 gateway, repeat steps 8 and 13.

The BootP status in the BootP/TFTP Server should show "Client Found" and "100%

OK" on all four files. If not, there is a problem with the file location. Verify that the file

location is accurate and reconfigure the Client Configuration dialog, if necessary.

page

2, using a long pinhole tool (such as a

) is not pressed in the main screen.