APlusLift HW-10KOH Manuel d'installation et d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} APlusLift HW-10KOH. APlusLift HW-10KOH 20 pages. 2-post over head car lift 10,000lb capacity
Également pour APlusLift HW-10KOH : Manuel d'installation et instructions d'utilisation (17 pages)
Imprimer la page
Step 5 (Installing Power Unit and Routing Hydraulic Hoses)
Mount the power unit onto the main side column with four hex bolts.
Connect two 4 1/4" fittings to both cylinders. Connect T-fitting to the power unit.
Connect short hydraulic hose to the power unit and the cylinder in power unit post.
Connect long hydraulic hose to the power unit and the cylinder in the opposite post.
Run the long hose over the overhead beam.
See figures below for hose layout and routing to the power unit. Do not over tighten the
fittings.
9