APlusLift HW-10KOH Kurulum ve Kullanım Kılavuzu - Sayfa 9

Kaldırma Sistemleri APlusLift HW-10KOH için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. APlusLift HW-10KOH 20 sayfaları. 2-post over head car lift 10,000lb capacity
Ayrıca APlusLift HW-10KOH için: Kurulum Kılavuzu ve Çalıştırma Talimatları (17 sayfalar)

Sayfayı Yazdır

APlusLift HW-10KOH Kurulum ve Kullanım Kılavuzu

1. Installation Requirements
2. Anchoring Tips
3. Installation Instructions
4. Operation
5. Maintenance
6. Part List

Step 5 (Installing Power Unit and Routing Hydraulic Hoses)

 Mount the power unit onto the main side column with four hex bolts.

 Connect two 4 1/4" fittings to both cylinders. Connect T-fitting to the power unit.

 Connect short hydraulic hose to the power unit and the cylinder in power unit post.

 Connect long hydraulic hose to the power unit and the cylinder in the opposite post.

Run the long hose over the overhead beam.

 See figures below for hose layout and routing to the power unit. Do not over tighten the

fittings.