Conviron CMP6050 Manuel d'instructions d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Conviron CMP6050. Conviron CMP6050 18 pages. Retrofit for 4000/5000 series controller installation instructions
CMP 6050 RETROFIT INSTALLATION INSTRUCTIONS
4.
From the rear of the control panel door, locate and remove the existing mounting hardware from
F
the threaded studs. Keep the mounting hardware as it will be re-used to mount the new control
panel assembly and retrofit cover panel. Some existing control panel doors are equipped with six
threaded studs instead of four.
Mounting hardware
5.
F
Remove controller power supply (Figure 2) (if not mounted to existing controller assembly), input
board and relay board (Figure 3) along with all associated existing wires. Place input and relay
boards in static sensitive packaging. Existing wires may be discarded.
TB3
•
Mounted to existing
controller assembly
Input board
6.
F
Locate and remove all controller communications cables (RJ11 modular jacks) from control panel
(Figure 4).
2
May 2013 |
257775R00
Figure 1
Figure 2
Figure 3
Figure 4
Mounting hardware
Controller power supply
•
Mounted to existing
controller assembly
Relay board
CONVIRON