DVDO DVDO-Xtend-TX100 Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DVDO DVDO-Xtend-TX100. DVDO DVDO-Xtend-TX100 19 pages. 3 x 1 hdbt wall-plate transmitter

Imprimer la page
DVDO-Xtend-TX100 3 x 1 HDBT Wall-plate Transmitter User Manual

API Command Control

Users can control the device via sending API commands as well. Please refer
to the following steps.
1.
Connect the HDBT OUT of the transmitter to HDBT IN of receiver, the
transmitter can be powered by receiver via Cat X cable.
2.
Use the Micro USB-B to USB-A cable provided to connect the UPDATE
port of the transmitter and your PC USB port. Or connect a PC to RS232
port of the connected receiver. It is ready for sending API commands.
3.
Open your PC Device manager, find out the port, here is COM 2 as
example.
4.
Install serial tool to your local folder (Take "UartAssist" tool as an
example).
5.
Open the tool and type the port number COM 2 and Baud Rate 115200.
DVDO-Xtend-TX100_V1.0 0
14
DVDO