DVDO DVDO-Xtend-TX100 사용자 설명서 - 페이지 14

{카테고리_이름} DVDO DVDO-Xtend-TX100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DVDO DVDO-Xtend-TX100 19 페이지. 3 x 1 hdbt wall-plate transmitter

DVDO-Xtend-TX100 3 x 1 HDBT Wall-plate Transmitter User Manual

API Command Control

Users can control the device via sending API commands as well. Please refer

to the following steps.

Connect the HDBT OUT of the transmitter to HDBT IN of receiver, the

transmitter can be powered by receiver via Cat X cable.

Use the Micro USB-B to USB-A cable provided to connect the UPDATE

port of the transmitter and your PC USB port. Or connect a PC to RS232

port of the connected receiver. It is ready for sending API commands.

Open your PC Device manager, find out the port, here is COM 2 as

example.

Install serial tool to your local folder (Take "UartAssist" tool as an

example).

Open the tool and type the port number COM 2 and Baud Rate 115200.

DVDO-Xtend-TX100_V1.0 0

DVDO