DVDO DVDO-Xtend-TX100 Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Trasmettitore DVDO DVDO-Xtend-TX100. DVDO DVDO-Xtend-TX100 19. 3 x 1 hdbt wall-plate transmitter

DVDO-Xtend-TX100 3 x 1 HDBT Wall-plate Transmitter User Manual

API Command Control

Users can control the device via sending API commands as well. Please refer

to the following steps.

Connect the HDBT OUT of the transmitter to HDBT IN of receiver, the

transmitter can be powered by receiver via Cat X cable.

Use the Micro USB-B to USB-A cable provided to connect the UPDATE

port of the transmitter and your PC USB port. Or connect a PC to RS232

port of the connected receiver. It is ready for sending API commands.

Open your PC Device manager, find out the port, here is COM 2 as

example.

Install serial tool to your local folder (Take "UartAssist" tool as an

example).

Open the tool and type the port number COM 2 and Baud Rate 115200.

DVDO-Xtend-TX100_V1.0 0

DVDO