4RF Aprisa SR+ Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} 4RF Aprisa SR+. 4RF Aprisa SR+ 12 pages. Demo kit
Également pour 4RF Aprisa SR+ : Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (2 pages)

Imprimer la page

10 | Demonstration Procedure

Advanced HMI 4RF SR+ SCADA Demo

Laptop Configuration and Installation

A USB flash drive containing all of the required software has been included with this demo kit. All of the

software is required to be loaded on the base station laptop.

1. From the 4RF demo kit USB flash drive, open the 4RF Advance HMI Install folder

2. Launch the setup.exe and install with default configurations

3. The program will now appear in the computers start menu

SCADA Simulation / HMI

Ensure the base station laptop is configured to the correct IP address: 172.17.200.110

1. Ensure the base station laptop is connected to Ethernet Port 1 of the base station radio

2. Ensure the Moxa RTU is powered on and displays the following LEDs:

a. Power: orange

b. Ready: green

c. Port 1: green

3. On the base station laptop, go to Start menu > All Programs > 4RF Advanced HMI

4. Proceed with selecting the various inputs via either the laptop or the switches on the demo kit and

observe the results

Momentary LED

Continually polls the

heartbeat LE D and

displays indicates the

state

Heartbeat Buttons

T urns on and off the 2sec

heartbeat LE D

(blue/green)

Momentary Button

T urns on an off the orange

switchbox LE D

Black switch indicator

Indicates the state of the

black latching switch

Red switch indicator

Indicates the state of the

red momentary switch

5. Close the application by closing the window

Aprisa SR+ Demo Kit Guide 1.3.0