Grease Guard G2 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Grease Guard G2. Grease Guard G2 10 pages.

Imprimer la page
The following tools are required for the installation
5/16" Hex key (provided with unit)
5/16" Hex head drive socket
Drill (recommended for 5/16" hex head screws
Drill (recommended for 5/16" hex head screws
Industrial type Scissors – (sharp)
Tape measure
Permanent Marker
Straight edge
WARNING!!!
Do not under any circumstances use a utility knife to cut the filters!!!
Utility knives will cut through to the roof surface causing serious damage
To the roof.

Tools Required

Of the G2 Grease Guard: