Grease Guard G2 Manuel - Sayfa 2

İnşaat Ekipmanları Grease Guard G2 için çevrimiçi göz atın veya pdf Manuel indirin. Grease Guard G2 10 sayfaları.

The following tools are required for the installation

5/16" Hex key (provided with unit)

5/16" Hex head drive socket

Drill (recommended for 5/16" hex head screws

Industrial type Scissors – (sharp)

Tape measure

Permanent Marker

Straight edge

WARNING!!!

Do not under any circumstances use a utility knife to cut the filters!!!

Utility knives will cut through to the roof surface causing serious damage

To the roof.

Tools Required

Of the G2 Grease Guard: