Aircommand Kingfisher Installation, entretien courant, spécifications, dépannage, garantie - Page 2
Parcourez en ligne ou téléchargez le pdf Installation, entretien courant, spécifications, dépannage, garantie pour {nom_de_la_catégorie} Aircommand Kingfisher. Aircommand Kingfisher 7 pages.
Imprimer la pageThe Aircommand Kingfisher is designed for installation beneath a benchtop or similar and is
installed through the outside wall of the van. The unit requires a minimum depth of 550 mm from
the outside skin of the van (refer fig.1).
PLACEMENT OF UNIT:
The unit should always be installed opposite the van door. This ensures that the condenser air does
not blow into the outside living area or into an annex if it is fitted. Where possible the air conditioner
should be centrally located within the van and narrow passages that hinder the distribution of air
should be avoided. The unit must sit on a level floor and be provided with a condensate drain hole
through the floor (refer fig. 2).
UNIT DIMENSIONS:
Height:
595mm
Width:
470mm
Depth:
500mm
INSTALLATION INSTRUCTIONS
Page 2 of 7
Revised 13/7/05
More information https://www.caravansplus.com.au