Great Lakes GLRR-1984 Instructions d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Great Lakes GLRR-1984. Great Lakes GLRR-1984 3 pages. 19" two post relay rack

Imprimer la page

STEP #1:

Install top angles

to vertical upright

channels.

A. Lay vertical

upright channels

on edge so

tapped holes face

you and the floor.

Be sure open

sides of upright

channels face

each other.

B. Align holes

in top angle with

corresponding holes in vertical uprights. Formed leg of top angle

should be facing toward you.

C. Install 2 hex head bolts and lock washers. Finger tighten only.

D. Turn vertical upright assembly over (rotate 180 degrees) and

repeat steps B and C. Finger tighten only.

STEP #2:

Install base angles

to vertical upright

channels.

A. Leaving vertical

upright channels

on edge, align

holes in base with

corresponding holes

in each upright

channel. Long leg

of base should be

facing you.

B. Install 4 hex

head bolts and lock

washers. Finger tighten only.

C. Turn vertical upright assembly over (rotate 180 degrees) and

repeat steps A and B. Finger tighten only.