Celestica Athena Erp lot9 EcoDesign Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Celestica Athena Erp lot9 EcoDesign. Celestica Athena Erp lot9 EcoDesign 16 pages.

Imprimer la page

System Disassembly Instructions

3(3)(b):

CAUTION: Always power off the system and unplug the power cord(s) first before

disassembling the system!

CPU

Type and number of fastenings: Four (4) T30 screws on heatsink.

Tools required: Screwdriver with T30 Torx bit. The screw torque should be

13 KGF.CM.

Procedure:

1) Use a T30 screw driver. The screw torque should be

Disassembly must be followed by 4,3,2,1 order, see the label on the

heatsink.

1) Then disassemble the CPU from the motherboard.

Step 1: Disassemble the Heatsink.

Step 2: Disassemble the CPU.

Figure 3- 1: Install the CPU

KGF.CM.