Celestica Athena Erp lot9 EcoDesign 매뉴얼 - 페이지 5
{카테고리_이름} Celestica Athena Erp lot9 EcoDesign에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestica Athena Erp lot9 EcoDesign 16 페이지.
System Disassembly Instructions
3(3)(b):
CAUTION: Always power off the system and unplug the power cord(s) first before
disassembling the system!
CPU
Type and number of fastenings: Four (4) T30 screws on heatsink.
Tools required: Screwdriver with T30 Torx bit. The screw torque should be
13 KGF.CM.
Procedure:
1) Use a T30 screw driver. The screw torque should be
Disassembly must be followed by 4,3,2,1 order, see the label on the
2)
heatsink.
1) Then disassemble the CPU from the motherboard.
Step 1: Disassemble the Heatsink.
Step 2: Disassemble the CPU.
Figure 3- 1: Install the CPU
13
KGF.CM.
5