Celestica Athena Erp lot9 EcoDesign Manual - Page 5

Browse online or download pdf Manual for Controller Celestica Athena Erp lot9 EcoDesign. Celestica Athena Erp lot9 EcoDesign 16 pages.

System Disassembly Instructions
3(3)(b):
CAUTION: Always power off the system and unplug the power cord(s) first before
disassembling the system!
CPU
Type and number of fastenings: Four (4) T30 screws on heatsink.
Tools required: Screwdriver with T30 Torx bit. The screw torque should be
13 KGF.CM.
Procedure:
1) Use a T30 screw driver. The screw torque should be
Disassembly must be followed by 4,3,2,1 order, see the label on the
2)
heatsink.
1) Then disassemble the CPU from the motherboard.
Step 1: Disassemble the Heatsink.
Step 2: Disassemble the CPU.
Figure 3- 1: Install the CPU
13
KGF.CM.
5