Gainlab Audio GLA-TC2 Manuel d'étalonnage - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'étalonnage pour {nom_de_la_catégorie} Gainlab Audio GLA-TC2. Gainlab Audio GLA-TC2 18 pages.
Également pour Gainlab Audio GLA-TC2 : Manuel (13 pages)

Imprimer la page

Gainlab Audio GLA-TC2 Manuel d'étalonnage

Switch to UNLINK.

Adjust: VR5

Measure: -3dBu on the left output

Error margin: +-0.1dBu

Adjust: VR6

Measure: -3dBu on the right output

Error margin: +-0.1dBu

Now keep watching the outputs and switch back and forward between LINK and UNLINK mode. If

there is a difference in the output signal which is greater than 0.1dBu then repeat the 5.3 step.

STEP – GR CALIBRATION

Starting point: Mode- HiComp, UNLINK, Threshold -9dB, meter - Reduction

Input signal: +0dBU 1kHz sine wave