Automationdirect.com Productivity 2000 P2-07B Manuel - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Automationdirect.com Productivity 2000 P2-07B. Automationdirect.com Productivity 2000 P2-07B 8 pages. Base
Imprimer la page
Panel Mounting Requirements
Enclosures
Your selection of a proper enclosure is important to ensure
safe and proper operation of your Productivity2000 system.
Applications for the Productivity2000 system vary and may require
additional hardware considerations. The minimum considerations
for enclosures include:
• Conformance to electrical standards
• Protection from the elements in an industrial
environment
• Common ground reference
• Maintenance of specified ambient temperature
• Access to the equipment
• Security or restricted access
• Sufficient space for proper installation and
maintenance of the equipment
Mounting Position
Mount the bases horizontally, as shown in the illustration, to provide
proper ventilation. Do not mount the bases vertically, upside down,
or on a flat horizontal surface.
Mounting Clearances
Provide a minimum clearance of 2" (50mm) between the bases and
all sides of the enclosure. Allow extra door clearance for operator
panels and other door mounted items. There should be a minimum
of 3" (76mm) clearance between the base and any wire duct, and
a minimum of 7.2" (183mm) from base to base in a multiple base
installation.
4
www.productivity2000.com
OK
AIRFLOW
2"
2"
Tech Support 770-844-4200
NOTE: Add
NOTE: Add 2" to mounting
depth when
depth when using ZIPLink
cable.
cable.