HighPoint RocketStor SMART RAID Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HighPoint RocketStor SMART RAID. HighPoint RocketStor SMART RAID 20 pages.

Imprimer la page

5. Creating an Array

You will need two separate hard disks or SSD's to create a RAID array. To create an array, click Array, then

click the "Create Array" button.

Note: Creating an Array will destroy all data stored on the selected hard disks and/or SSD's!

Be sure to backup all important data before creating arrays. Any data stored on the selected devices will be

lost during the creation process.

1) Click the "Array Type" drop-down menu and select the desired RAID level.

Array Type:

RAID Levels:

RAID 0 (maximize performance) - Also known as a "stripe" array. This will combine both devices into

a single, high-performance "drive".

Capacity is determined by the smallest drive, multiplied by two. For example, a RAID 0 array created

using a 1 TB drive and a 2TB drive will result in 2TB of usable capacity.

RAID 1 (security) – RAID 1 arrays are also known as a "mirror" arrays. Any data written to the source

disk (Drive 1) is automatically written to the target device (Drive 2) – creating an exact physical copy.

The following menu will be displayed: