HighPoint RocketStor SMART RAID 사용자 설명서 - 페이지 14
{카테고리_이름} HighPoint RocketStor SMART RAID에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HighPoint RocketStor SMART RAID 20 페이지.
페이지 인쇄5. Creating an Array
You will need two separate hard disks or SSD's to create a RAID array. To create an array, click Array, then
click the "Create Array" button.
Note: Creating an Array will destroy all data stored on the selected hard disks and/or SSD's!
Be sure to backup all important data before creating arrays. Any data stored on the selected devices will be
lost during the creation process.
1) Click the "Array Type" drop-down menu and select the desired RAID level.
Array Type:
RAID Levels:
RAID 0 (maximize performance) - Also known as a "stripe" array. This will combine both devices into
a single, high-performance "drive".
Capacity is determined by the smallest drive, multiplied by two. For example, a RAID 0 array created
using a 1 TB drive and a 2TB drive will result in 2TB of usable capacity.
RAID 1 (security) – RAID 1 arrays are also known as a "mirror" arrays. Any data written to the source
disk (Drive 1) is automatically written to the target device (Drive 2) – creating an exact physical copy.
The following menu will be displayed:
14