HighPoint RocketStor SMART RAID Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Armazenamento HighPoint RocketStor SMART RAID. HighPoint RocketStor SMART RAID 20 páginas.

Imprimir página

5. Creating an Array

You will need two separate hard disks or SSD's to create a RAID array. To create an array, click Array, then

click the "Create Array" button.

Note: Creating an Array will destroy all data stored on the selected hard disks and/or SSD's!

Be sure to backup all important data before creating arrays. Any data stored on the selected devices will be

lost during the creation process.

1) Click the "Array Type" drop-down menu and select the desired RAID level.

Array Type:

RAID Levels:

RAID 0 (maximize performance) - Also known as a "stripe" array. This will combine both devices into

a single, high-performance "drive".

Capacity is determined by the smallest drive, multiplied by two. For example, a RAID 0 array created

using a 1 TB drive and a 2TB drive will result in 2TB of usable capacity.

RAID 1 (security) – RAID 1 arrays are also known as a "mirror" arrays. Any data written to the source

disk (Drive 1) is automatically written to the target device (Drive 2) – creating an exact physical copy.

The following menu will be displayed: