AGS Merlin 1000SW+ Manuel d'installation et d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AGS Merlin 1000SW+. AGS Merlin 1000SW+ 16 pages. Gas, electric & water isolation controller
Également pour AGS Merlin 1000SW+ : Installation Fonctionnement et entretien (12 pages)

AGS Merlin 1000SW+ Manuel d'installation et d'utilisation
Installation & Operation Manual

Typical Installation Arrangement

Terminal Connections

1. POWER / LINE IN
110-120V AC Power should be supplied to the [POWER / LINE IN] terminal and fused at 3A.
On connecting the mains supply to the panel the power LED indicator will light up – this is
located on the front cover (American Gas Safety Logo).
2. GAS SOLENOID VALVE OUTPUT
100-120V AC electrical power supplied from the [VALVE OUT] connector using a 3 core cable
can be connected to a gas solenoid valve which can shut the gas supply on alarm status.
Pressure sensors should be screwed to the downstream port of the valve.
Refer to your valve manual for more information and wiring!
1000SW+ IOM Rev: 09
01-20
Merlin 1000SW+
4