AGS Merlin 1000SW+ Kurulum ve Kullanım Kılavuzu - Sayfa 4
Kontrolör AGS Merlin 1000SW+ için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. AGS Merlin 1000SW+ 16 sayfaları. Gas, electric & water isolation controller
Ayrıca AGS Merlin 1000SW+ için: Kurulum Operasyon ve Bakım (12 sayfalar)
Sayfayı Yazdır
Installation & Operation Manual
Typical Installation Arrangement
Terminal Connections
1. POWER / LINE IN
110-120V AC Power should be supplied to the [POWER / LINE IN] terminal and fused at 3A.
On connecting the mains supply to the panel the power LED indicator will light up – this is
located on the front cover (American Gas Safety Logo).
2. GAS SOLENOID VALVE OUTPUT
100-120V AC electrical power supplied from the [VALVE OUT] connector using a 3 core cable
can be connected to a gas solenoid valve which can shut the gas supply on alarm status.
Pressure sensors should be screwed to the downstream port of the valve.
Refer to your valve manual for more information and wiring!
1000SW+ IOM Rev: 09
01-20
Merlin 1000SW+
4