Hikari HTJ-2502C-01 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Hikari HTJ-2502C-01. Hikari HTJ-2502C-01 17 pages. 8.5l ultrasonic humidifier

Imprimer la page
Tech support: [email protected]

Function Description

Operating Instructions

On/Off

1. Plug into a power outlet and the humidifier enters standby mode.
2. Press the "knob" or press the " button"
on the remote control to turn your
humidifier on. The green light comes on. The default humidity level is 6. The
Humidification Mode Indicator
and the Mist Level Indicator
light up. The display
cycles through the current ambient humidity and temperature.
3. Press and hold the "knob" or press the "on/off button"
on the remote control to
enter the standby mode. Display and indicator lights go out.

Function Switching

1. In the power-on state, turn the body "knob" for function switching。
2.
Turn the "knob" clockwise in order: Mist Level - Humidity - Timing - Mist Level
"cycle switching. Select the function you need, press the body "knob" again to enter
the selected function setting mode.

Mist Level Adjustment

1. Turn the body "knob", the display shows the current mist level, press the body
"knob" to enter the mist setting mode. After entering the setting mode, turn the "knob"
clockwise, the display shows "1-2-3-4-5-6-1" cycle, press the "knob" or do not operate
after 5 seconds, confirm the selection of the corresponding mist level, the icon
lights
up.
2. Press the "Humidification Mode Button"
on the remote control, then press the "+
- "
button can also adjust the mist level.
4