Hikari HTJ-2502C-01 사용자 설명서 - 페이지 5

{카테고리_이름} Hikari HTJ-2502C-01에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hikari HTJ-2502C-01 17 페이지. 8.5l ultrasonic humidifier

Tech support: [email protected]

Function Description

Operating Instructions

On/Off

1. Plug into a power outlet and the humidifier enters standby mode.
2. Press the "knob" or press the " button"
on the remote control to turn your
humidifier on. The green light comes on. The default humidity level is 6. The
Humidification Mode Indicator
and the Mist Level Indicator
light up. The display
cycles through the current ambient humidity and temperature.
3. Press and hold the "knob" or press the "on/off button"
on the remote control to
enter the standby mode. Display and indicator lights go out.

Function Switching

1. In the power-on state, turn the body "knob" for function switching。
2.
Turn the "knob" clockwise in order: Mist Level - Humidity - Timing - Mist Level
"cycle switching. Select the function you need, press the body "knob" again to enter
the selected function setting mode.

Mist Level Adjustment

1. Turn the body "knob", the display shows the current mist level, press the body
"knob" to enter the mist setting mode. After entering the setting mode, turn the "knob"
clockwise, the display shows "1-2-3-4-5-6-1" cycle, press the "knob" or do not operate
after 5 seconds, confirm the selection of the corresponding mist level, the icon
lights
up.
2. Press the "Humidification Mode Button"
on the remote control, then press the "+
- "
button can also adjust the mist level.
4